MBone is an abbreviation for ‘Multicast Backbone’. It is the realization of a virtual network built on top of the Internet protocol. In contrast to connection-oriented transmission of data (unicast) and the transmission from a sender to all destinations in a network (broadcast) it provides the multicast facility, a facility to send data to all hosts that have joined a so-called ‘multicast group’. All members of a group are able to send data to and receive data from the group. Your program is to simulate a simplified version of the MBone. In our setting MBone is a com- bination of multicast routers and hosts, each host belonging to one of the routers. A router and the hosts that belong to it are called an island. Routers are connected via tunnels which are simple com- munication channels: data packets sent from one side through the tunnel are received on the other side. In order to become a member of a multicast group, a host must send a protocol message to its corresponding multicast router specifying the address of the group it wants to join. As a consequence the host will receive all data packets sent to this group. In order to send a data packet to a multicast group, a host sends the packet to the multicast router within its island. Every multicast router duplicates all received packets and sends them through each of its outgoing tunnels. After that it sends copies of the packet to all hosts on its island that have joined the group specified in the packet. The distribution range of a packet within MBone is restricted through an integer value called TTL (Time To Live) which is assigned to every packet. If a packet is sent through a tunnel its TTL is decremented by the threshold (an integer value) specified for each tunnel. A packet will not be sent over a tunnel if the TTL of the packet is lower than the threshold of the tunnel.
2/3 Input
The input to your program will consist of several descriptions of MBone networks. The first part of each description defines the network topology, and the second part describes the activities on this network. The first part starts with a line containing a single integer m (1 ≤ m ≤ 10), the number of islands in the network. A value of m = 0 indicates the end of input. The following lines contain the descriptions for the m islands.
Each island description starts with a line containing the name of the multicast router (given as a string of at most 20 non-blank characters) followed by an integer for the number of remaining lines in the island description. These lines can be of two kinds:
Host belonging to island: H < Host Address >
Tunnel: T < Threshold > < Dest. Name >
< Host Address > and < Threshold > are positive integer values specifying the address of the host and the threshold of the tunnel, respectively. < Dest. Name > is the name of the destination router at the other end of the tunnel, which is always different from the current router.
The first line of the second part contains a single integer of at most 1000 indicating the number of lines in the following activity description. Each one of these lines describes the activity of a host: join a group, leave a group or send a packet to a group.
Join a group: J < Host Address > < Group Address >
Leave a group: L < Host Address > < Group Address >
Sendapackettoagroup: S
3/3 H 722 H 723 T 6 Nuremberg H 857 T 9 Ulm Ulm 5 H 51225 H 51226 H 51227 T 15 Nuremberg T 9 Munich 14 J 51227 26 J 3768 27 J 723 26 J 3768 26 S 3768 26 1000 17 J 857 26 S 3768 26 320 16 J 722 26 L 857 26 S 51227 26 1001 37 S 723 26 533 5 L 51227 26 L 3768 27 L 723 26 0 Sample Output Network #1 722 533 5 722 1001 28 723 320 8 723 533 5 723 1000 9 723 1001 28 857 320 8 3768 320 16 3768 1000 17 3768 1001 22 51227 1000 0 51227 1001 37